← Back
HUXXA SILCOAT 15 & 16
Features
- Higher dry film thickness of 1000–1200 microns in 2 coat applications
- No need to remove existing plaster, concrete or sound brickbat cement concrete
- Increases flexural & tensile strength and tear resistance strength
- Highly resistant to UV & withstands freeze-thaw weather conditions
- Bridges cracks up to 2 mm width without additional work
- Non-toxic & environment-friendly eco product
Mixing Ratio
- For wall application - Diluted up to 35% water
- For floor application - Apply directly from container — no mixing or heating required
- First coat may be diluted up to 10% water for better penetration
Benefits
- Film thickness – Provides higher dry film thickness of minimum 1 mm in three coat application Crack bridging – Good Bridges cracks
- Suitability - Can be used for flat as well as sloping roofs
- Easy for Applicable – By Brush & Roller
Pack Size
- 1Kg, 4Kg, 20Kg
Application Area
- Building roofs / Terraces– Flat & slope
- RCC Structure
- Over existing cementitious waterproofing treatments like brick-bat coba & Concrete Screed
How to Use
Clean, wash & remove dust, dirt, oil, grease & loose particles with wire brush or water jet
Check soundness of old brickbat coba/screeds; cut & remove hollow, damaged or cracked portions
Recoat exposed slab with HUXXA SBR-11 & cement slurry in 1:1 proportion
Fill cracks up to 1mm with Crack Seal Paste; cracks above 1mm with SBR-11 mortar slurry & dry 24 hrs
Prime the surface with HUXXA Silcoat diluted 1:2 with water
Stir well before use; do not dilute the main coating with water or other products
Apply the first coat by brush or roller; let it dry for 6–8 hours
Apply the second coat at right angles to the first; allow to dry for one day
Coat all corners, gaps, joints, protrusions & outlets with two extra coats
Allow 7 days to cure the coating before any ponding test
You may also like
Related Products
Get a Quote
Request a quote
Product: