📞 7016970041 ✉ shreejiconchem@gmail.com
Home About Divisions — Tile Adhesives — Epoxy Grouts — Bonding Systems — Waterproofing Grout & Tile Studio Coverage Calculator Why Huxxa Gallery Contact
📞 7016970041 ✉ shreejiconchem@gmail.com
Get a Quote
← Back

HUXXA EG 2K

HUXXA EG 2K

Features

  • For grout joints between 1 mm – 10 mm
  • Available in widely used colors; can be applied on wall and floor
  • Highly thixotropic — non-sag formula; water cleanable grout
  • Low water absorption results in watertight joints
  • Hygienic in service — would not allow bacterial growth
  • Low VOC — over curing full reaction takes place

Mixing Ratio

  • 700gm resin & 300gm hardner in 1kg pack
  • Shake bottle of Hardener and stir the Base prior to mixing
  • Add all of the Hardener to the entire Base in clean container; mix at slow speed (< 300 rpm)
  • Add pre-measured Filler slowly, mix until uniform colour and lump-free consistency
  • Avoid entraining air by mixing at very high speed or by over-mixing
  • Pot life: 60 minutes — apply within 35 minutes of mixing at 30°C ambient temperature
  • Strictly do not add water; part mixing is not allowed

Benefits

  • Easy Application
  • Better Durability
  • Waterproof
  • Can be used for interior and exterior uses
  • Excellent resistance to acid and alkalis.

Pack Size

  • 1 & 5Kg

Application Area

  • Wall & Floor Tiles & Stone
  • Laboratories
  • Food processing plants
  • Hospitals, abattoirs
  • Kitchen and swimming pools etc.

How to Use

Using a hard rubber squeeze, press grout firmly into joints ensuring complete filling
Work in small areas; move squeeze diagonally to grout lines to remove excess material
Spread grout generously with float; start from one end in smooth continuous motions
Work from bottom to top when grouting walls; use float edge to remove excess grout
Clean surplus grout from surface within 10–15 min using rough textured damp sponge
Clean epoxy/water residue with fine textured damp sponge in circular motion

HUXXA EG 2K